Mar 6, 2007 #1 zircon06 Technical User Joined Jan 8, 2007 Messages 81 command to check system of AIX box Thanks
Mar 6, 2007 #2 spamly MIS Joined Apr 1, 2004 Messages 447 Location US I don't understand what you're asking. Are you looking for something like this? uname -a oslevel -r Upvote 0 Downvote
Mar 6, 2007 #3 p5wizard IS-IT--Management Joined Apr 18, 2005 Messages 3,165 Location BE uptime w vmstat sar ??? HTH, p5wizard Upvote 0 Downvote
Mar 6, 2007 #4 sbrews Technical User Joined Jun 11, 2003 Messages 413 Location US prtconf lsdev ??? if you can be more specific in your question, I'm sure the appropriate answer will be given. Upvote 0 Downvote
prtconf lsdev ??? if you can be more specific in your question, I'm sure the appropriate answer will be given.
Mar 7, 2007 #5 khalidaaa Technical User Joined Jan 19, 2006 Messages 2,323 Location BH Thats very vauge question! I will go with topas Upvote 0 Downvote
Mar 7, 2007 #6 masrolyat MIS Joined Feb 16, 2007 Messages 24 Location US bootinfo -T will tell you the architecture so chrp, rspc,or rs6ksmp System MUSt be chrp to install AIX 5.2 or higher prtconf |more will tell you the model type unless its a really old microchannel model Upvote 0 Downvote
bootinfo -T will tell you the architecture so chrp, rspc,or rs6ksmp System MUSt be chrp to install AIX 5.2 or higher prtconf |more will tell you the model type unless its a really old microchannel model