Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Combine multiple Shortcodes 2
- Thread starter chda
- Start date
-
2
- #2
chda,
When a user is a member of multiple groups then only one button is needed for doing this for those groups.
Just do not enter a group number.
With this button you can put it in out of service for one group or all group where you are a member in.
If you are not a member then you need to build a shortcode for each group.
Then make a button for the user with action dial and telephone number.
The telephone number contains the shortcodes each separated with a ,
BAZINGA!
I'm not insane, my mother had me tested!
When a user is a member of multiple groups then only one button is needed for doing this for those groups.
Just do not enter a group number.
With this button you can put it in out of service for one group or all group where you are a member in.
If you are not a member then you need to build a shortcode for each group.
Then make a button for the user with action dial and telephone number.
The telephone number contains the shortcodes each separated with a ,
BAZINGA!
I'm not insane, my mother had me tested!
mattKnight
Programmer
* for reminding me about the comma feature.
I'd forgotten that!
Take Care
Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
I'd forgotten that!
Take Care
Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
- Thread starter
- #4
Not sure what your application is but if you have the right release of vmpro then you could modify my faq and set the service mode of the group.
Group service mode:
0 = out of service
1 = in service
2 = night service
Group service mode:
0 = out of service
1 = in service
2 = night service
Guys,
I'm sure you know this but on the 16xx and 96xx phones you do not need to set shortcodes to achieve this.
Under the User>Menu Programming>Hunt Group.
Here, check Change HG Membership box next to the group that you want the user to log in and out of.
On the handset you will now get a Status button. Press this and the user can select to enable and disable the selected group membership.
Simples!
;-)
ACSS (SME)
I never touched anything...
I'm sure you know this but on the 16xx and 96xx phones you do not need to set shortcodes to achieve this.
Under the User>Menu Programming>Hunt Group.
Here, check Change HG Membership box next to the group that you want the user to log in and out of.
On the handset you will now get a Status button. Press this and the user can select to enable and disable the selected group membership.
Simples!
;-)
ACSS (SME)
I never touched anything...
mattKnight
Programmer
>And why are you snooping around Matt
Just keeping you on your toes.
Take Care
Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
Just keeping you on your toes.
Take Care
Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
- Status