Hello, I'm near completion of my document, ready to send it to the printer. However, whenever I do a "collect for output", I get an error: QuarkXPress has generated too many errors and will be shut down. I researched the Knowledge Base, and all I could come up with is this problem may be caused by duplicate file names. After a cursory search, I do not believe that I have any duplicate file names. Any other ideas or solutions? Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Collect for output crashes 4.1
- Thread starter makphisto
- Start date
- Thread starter
- #4
Thanks for the help!
I double checked all of the images and they seem to be fine. Here's an interesting test I did, as suggested from the Quark forum:
I divided my document into smaller sections, and tried to collect each section. Guess what? Each section "collects" fine. Only when I try to collect the entire document do I get the error.
Any other ideas?
FYI, the images are on my hard drive, and I am using the Windows version...
I double checked all of the images and they seem to be fine. Here's an interesting test I did, as suggested from the Quark forum:
I divided my document into smaller sections, and tried to collect each section. Guess what? Each section "collects" fine. Only when I try to collect the entire document do I get the error.
Any other ideas?
FYI, the images are on my hard drive, and I am using the Windows version...
Guest_imported
New member
- Jan 1, 1970
- 0
We're getting this problem too, and have no solution so far... If anyone figures it out, please let us know. I have a feeling that Quark needs to be reinstalled, or is it Windows?
sillyhatch@hotmail.com
sillyhatch@hotmail.com
I had the same problem while trying to do a collect on PC running Quark 4.11, win2000 pro and I found a way around it.
Go to Xtension manager in Quark and desactivate all Xtension you don't need. Personnaly I desactivated all the following (since I didn't need those at the final stage of the project):
LZW import
Enhanced Preview
MS-Word Import
Wordperfect import
MS-write import
Photo CD import
QuarkLink
Also, I deactivated from Print manager: adobe Distiller just in case
Try different combinaison on your own and see if it works
Good luck
Yakoob
Go to Xtension manager in Quark and desactivate all Xtension you don't need. Personnaly I desactivated all the following (since I didn't need those at the final stage of the project):
LZW import
Enhanced Preview
MS-Word Import
Wordperfect import
MS-write import
Photo CD import
QuarkLink
Also, I deactivated from Print manager: adobe Distiller just in case
Try different combinaison on your own and see if it works
Good luck
Yakoob
- Status