Hi
I have raised a ticket with Avaya regarding a fresh install of Solairs and CMS R17 on a T5210 server.
As per the Softare Installation and Maintenance Proceedures Manual.
Fom scratch …booted CMS – pressed STOP+A during boot …got OK prompt
setenv auto-boot? false
setenv fcode-debug? True
reset-all
probe-scsi-all
14. Insert the Solaris 10 SPARC software disc into the disc drive.
15. Boot to the Solaris 10 DVD, enter: boot cdrom
16. The system boots from the disc and displays a list of languages.
17. Select the language that is appropriate for your location, and press Enter.
The system displays "Welcome" Screen.
Note:Note: Do not select Next.
18. Continue with Configuring RAID on page 27.
Pg27 - Configuring RAID – I am instructed to open a terminal window enter
stty erase Backspace
ksh –o vi
now unmount and remove the solaris cdrom
insert and mount the CMS software cd
copy the setraid file to the temp directory
cp -p /cdrom/setraid /tmp
execute the setraid from the /tmp directory
/tmp/setraid
Message on screen
***** IMPORTANT!! *****
The system is booted from a Solaris 10 8/11 (Update 10) DVD
If the system is being restored be sure that the system is booted from the
same version of Solaris that was used to build the original CMS system.
Please enter y to continue or press any other key to quit:
Instruced to remove cms Software CD and insert the Solaris CD again ….then press Y to message above
Comes back with
INFO: Setting up RAID – RAID 10 for SPARC, RAID 1 for x86
INFO: Intel chip RAID card. Arcconf utility will be used
INFO: Installing required RAID packages. Please wait…...
ERR: SUNWgccruntime or RAID utility StorMan install failed
the above is with an AAC RAID controller installed, I have also swapped the RAID controller to a MR-SAS but still get the same results.
The log file from the error above suggests that the package is not on the CDROM. - although the manual instructs to put the Solaris disk 10 8/11 back in.
Any help or greatly apreciated
I have raised a ticket with Avaya regarding a fresh install of Solairs and CMS R17 on a T5210 server.
As per the Softare Installation and Maintenance Proceedures Manual.
Fom scratch …booted CMS – pressed STOP+A during boot …got OK prompt
setenv auto-boot? false
setenv fcode-debug? True
reset-all
probe-scsi-all
14. Insert the Solaris 10 SPARC software disc into the disc drive.
15. Boot to the Solaris 10 DVD, enter: boot cdrom
16. The system boots from the disc and displays a list of languages.
17. Select the language that is appropriate for your location, and press Enter.
The system displays "Welcome" Screen.
Note:Note: Do not select Next.
18. Continue with Configuring RAID on page 27.
Pg27 - Configuring RAID – I am instructed to open a terminal window enter
stty erase Backspace
ksh –o vi
now unmount and remove the solaris cdrom
insert and mount the CMS software cd
copy the setraid file to the temp directory
cp -p /cdrom/setraid /tmp
execute the setraid from the /tmp directory
/tmp/setraid
Message on screen
***** IMPORTANT!! *****
The system is booted from a Solaris 10 8/11 (Update 10) DVD
If the system is being restored be sure that the system is booted from the
same version of Solaris that was used to build the original CMS system.
Please enter y to continue or press any other key to quit:
Instruced to remove cms Software CD and insert the Solaris CD again ….then press Y to message above
Comes back with
INFO: Setting up RAID – RAID 10 for SPARC, RAID 1 for x86
INFO: Intel chip RAID card. Arcconf utility will be used
INFO: Installing required RAID packages. Please wait…...
ERR: SUNWgccruntime or RAID utility StorMan install failed
the above is with an AAC RAID controller installed, I have also swapped the RAID controller to a MR-SAS but still get the same results.
The log file from the error above suggests that the package is not on the CDROM. - although the manual instructs to put the Solaris disk 10 8/11 back in.
Any help or greatly apreciated