ReallyRotten
MIS
Has anyone set up call manager express for overhead paging with a TAMB unit? What configuration is required - a DN, paging group and anything else?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CME 8.0 paging
- Thread starter ReallyRotten
- Start date
- Status
- Thread starter
- #2
ReallyRotten
MIS
For overhead paging in CME:
Create a dial peer and assign a voice port
EG
dial-peer voice 99 pots
description Overhead paging
destination-pattern 99
incoming-called number 99
port 0/1/1
Follow the TAMB diagram for proper hookup.
Create a dial peer and assign a voice port
EG
dial-peer voice 99 pots
description Overhead paging
destination-pattern 99
incoming-called number 99
port 0/1/1
Follow the TAMB diagram for proper hookup.
- Status
Similar threads