CME 4.1 - Not registering "Opening" random IP

[tdrew]

Has anyone ever had their phone try to connect to a completely random IP?

Configuring IP
Configuring CME
Then "opening 208.67.xxx.xxx".

I have 2 7921 phones that used to work on my network. I moved and switched to a new router. Now my phones are trying to connect to a random IP (208.67.xxx.xxx). This IP is nowhere in my config or my router. I also lose all of my phone options as it tries to connect. Only the "1. Phone Settings" option is selectable under Settings. 1 of the 2 phones actually worked at my new house for a week. But, when I restarted the phone it started trying to find this other IP.

Any ideas?

 

[tdrew]

I think my loads are no longer in my TFTP. I am going to try and move them to the flash again.

 

[tdrew]

The phone loads were there...back to no idea.

Let me know please if you have any ideas.

Thanks!

 

[OzzieGeorge]

Have you factory reset the phones to clear out anything that may have got screwed up?

 

[tdrew]

I have to do a factory reset each time the phone tries to connect to the random IP. All of the settings on the phone get grey'd out while it is connecting. The only option I have is the Phone Settings directory for the factory reset.

I did some reading about firmware. I updated the phones to the latest firmware at my office 1.3.3. Apparently I can't downgrade far enough to use them again on CME 4.1.

If that is wrong please let me know.

Thanks again.