CM V recorde Interface 1

[AvayaHelp]

How or where can the recorder interface be turn off on a CM V Station? This is the beeping you hear every 13.5 seconds on the phone when you first install a new phone.

I have this for CM II/IV but it does not seem to work on a CM V:
To enable or disable the warning tone on the recorder interface
1) While on-hook (the headset must be unplugged), press [ Select ].
* The light next to [ Select ] goes on.
2) Press [ Mute ].
* The CALLMASTER set is in option programming mode.
3) Dial the 2-digit code, "78" ("RT").
* The current setting (Enabled or Disabled) is shown on the
display.
4) Dial [ * ] to change the setting.
5) When the setting you prefer is shown on the display, press [ # ] to save it and exit programming mode.

Thanks

Self taught on S8700 & S8710 v2.2/CMIV/Octel 250/CMS v12/Intuity AUDIX/IP Agent/VoIP/Programming
==========================================================
Does anyone have a quarter, I need to make a phone call?

 

[lopes1211]

Should be 2 small dip switches on the bottom of the phone. Set both to off.


-CL

 

[AvayaHelp]

Thanks that seems to have worked but now the User is claiming they hear a buzzing noise in their ear.

Thanks

Self taught on S8700 & S8710 v2.2/CMIV/Octel 250/CMS v12/Intuity AUDIX/IP Agent/VoIP/Programming
==========================================================
Does anyone have a quarter, I need to make a phone call?

 

[lopes1211]

Check another working unit to make sure Off/Off is the correct setting.

-CL