CM 6.x question

[telm59]

I am replacing a 4.0 system with a new 6.3, the issue is my customer has 2 subnets that do not talk to each other.
The 4.0 system has CNA on the 172 subnet (ipsi,clans,medpro, all ip phones). The corporate lan is on the 192 subnet.
The customer would use this for administration. Is there a way to configure the 6.3 system to accomplish this?

Thanks.

 

[wpetilli]

There is no more cntrl network a and b on the new CM. They basically just have physical connection for the corporate Lan port and a 2nd if you are doing NIC bonding. The IPSI's, I believe need to be able to speak to the rest of the equipment. I'll defer, but you may have to route those 2 subnets or re-IP the IPSI's. I went thru this myself.. in one site the CNTRL A and B were on separate VLAN's and didn't speak to the main VLAN and things didn't work.