Hi All,
I have a question regarding the licence file on CM3.1.5 for a ESS Cluster. Heres my current set-up:
Main Site - Server Cluster 1
2x S8720
Port Networks 1 & 2
ESS Site - Server Cluster 2
1x S8510
Port Network 3
ESS Site - Server Cluster 3
2x S8720
Port Networks 4 & 5
LSP Site - MG 1
1x S8300C
1x G700
The IPSI's in Port Network 4 and 5 were replaced by the customer. Therefore my Active S8720 in server cluster 3 is in Licence Error mode as there is a serial number mismatch. So I've completed a maintenance swapout on RFA and now have a new licence file referencing the new serial number if IPSI 4A.
So my question is do I just need to install the new lic & pwd files on the servers in cluster 3, or do I need to install a new lic & pwd file on all servers?
I think I only need to install the lic & pwd files on the servers in cluster 3, but serveral colleagues think I need to update all servers with a new lic & pwd file.
Hope this makes sense and that somebody can point me in the right direction.
Cheers
Glimma
I have a question regarding the licence file on CM3.1.5 for a ESS Cluster. Heres my current set-up:
Main Site - Server Cluster 1
2x S8720
Port Networks 1 & 2
ESS Site - Server Cluster 2
1x S8510
Port Network 3
ESS Site - Server Cluster 3
2x S8720
Port Networks 4 & 5
LSP Site - MG 1
1x S8300C
1x G700
The IPSI's in Port Network 4 and 5 were replaced by the customer. Therefore my Active S8720 in server cluster 3 is in Licence Error mode as there is a serial number mismatch. So I've completed a maintenance swapout on RFA and now have a new licence file referencing the new serial number if IPSI 4A.
So my question is do I just need to install the new lic & pwd files on the servers in cluster 3, or do I need to install a new lic & pwd file on all servers?
I think I only need to install the lic & pwd files on the servers in cluster 3, but serveral colleagues think I need to update all servers with a new lic & pwd file.
Hope this makes sense and that somebody can point me in the right direction.
Cheers
Glimma