Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cll Pilot 200i dongle

Status
Not open for further replies.

SMMC

Technical User
Nov 13, 2002
61
US
Should this be hanging out f the card somewhere? I need the id# for upgrade but not exactly sure what I am looking for.
Thanks
 
It looks like a CMOS battery, on the motherboard, under the daughterboard.

Possibly the info you need is in the System Information utility? Or, pull the PBX TID and run it thru KRS and then select the CP from the dropdown; should give you all the info you need there too?

Matthew - Technical Support Engineer
 
Why not run the config wiz and read the serial number from there?
 
The 200I did not have a dongle. Didn't have them until the 201. Look under system information I think
 
The dongle for a 200I server is located under the daughter board..... a miserable thing to get to.

The 200I as I remember it had an optional C-Lan interface.
 
Yes, my 200i hardware maintenance NTP says the same thing, DFKSydney...

Matthew - Technical Support Engineer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top