CLIP on analoge phones

[lalrl]

For BC13 the extension-based FAL1046191 is introduced. Which Bit (i think icat=D5-D7) is to set, that a license is used by MD?

 

[TeleLion]

ICAT:
D1 = 8 (Caller identity presentation on analogue phones)
D5 = 0 Type of signalling FSK
1 Type of signalling DTMF
0 Type of standard ETSI
2 Type of standard Bellcore
D6 = 0 Data transmission mode during rining
1 Data transmission mode prior to rining DT-AS
2 Data transmission mode prior to rining RP-AS
3 Data transmission mode prior to rining LR + DT-AS

not D7

To MD or not to MD that is the question

 

[lalrl]

thanks. So D1 is the important thing for consuming the license!

 

[TeleLion]

yes but you need to set D5 and D6 too.

To MD or not to MD that is the question

 

[lalrl]

and D7... for filtering/translation of ascii-code