Clearing Call Forward 1

[cshine]

What is the command (or is there one?) to clear call fowarding using ASA? I have some lines that were set up by a previous technician that are all call foward to another line and I want to cancel this forward. I have a Definity G3si.

Thanks Gurus!

Candice

 

[ezncool]

I dont know if ASA has a command that can clear it but you can assign your extension console permission and use the unforward FAC to remove forwarding on all telephones remotely.

ezncool
You cannot solve problems with the same
type of thinking that created them.
-Albert Einstein

 

[avayastrongman79]

You can also do this from ASA, while logged in via GEDI or emulation. Do a display st xxxx or ch st xxxx, and apply the feature that you want to activate on the phone. Make sure you know the numeric button position of that feature. IE, 1-8, or 1-16 depending on the set type. Do a list trace st xxxx/x (where x is the sum of: 6 + numeric button value from above). It will activate the corresponding feature on that phone. Very handy if you're in a pinch and need to get something done quickly.

 

[Fredfred1]

Bridge anappearance of the line that is call forwarded on your phone and then un-forward it.