tangerine0072000
Technical User
Hi,
I need to create a vpn between two PIX firewalls, but both internal subnets are using 192.168.1.0/24
Does anyone know if it's possible to configure one of the PIX firewalls to present say 192.168.2.0/24 to the other remote firewall using NAT.
Note sure of the commands....help !
thanks
I need to create a vpn between two PIX firewalls, but both internal subnets are using 192.168.1.0/24
Does anyone know if it's possible to configure one of the PIX firewalls to present say 192.168.2.0/24 to the other remote firewall using NAT.
Note sure of the commands....help !
thanks