My problem is the application which works fine on Win95 and before is hanging when used on a Win 2000 PC. The user will click on a button and the application will proceed to what it's designed to do. Then the user will back out close the applciation, restart and when they use the same button all they get is a blank frame. I have recreated the the application on a Win 2000 PC and still have the same problem. Are there any known problems with 4.0 and Win2000?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Clarion 4.0 & Win 2000, Application is locking up.
- Thread starter RCRRPG
- Start date
You have not provided much detail but you may have a database corruption problem caused by write-behing caching.
Make sure you have dissabled Write-Behind caching on your data drives.
1) Right click My Computer icon on desktop
2) Select properties from popup menu
3) Select Hardware Tab
4) Press Device Manager button
5) Expand Disk drives tree
6) For your data drive (preferably all drives)
a) Right click drive and select Properties
b) Select disk properties tab
c) Clear (uncheck) Write Cache enabled
Make sure you have dissabled Write-Behind caching on your data drives.
1) Right click My Computer icon on desktop
2) Select properties from popup menu
3) Select Hardware Tab
4) Press Device Manager button
5) Expand Disk drives tree
6) For your data drive (preferably all drives)
a) Right click drive and select Properties
b) Select disk properties tab
c) Clear (uncheck) Write Cache enabled
- Status
Similar threads
- Locked
- Question
- Locked
- Question