Citrix Thin Client - sendobject function

[donkc1]

Hi,
I have a strange problem. I published an access application on citrix. When the user logs in to the web interface, opens the application, and selects the function that uses the sendobject, it works fine. If they try, and use it from a thin client, they get a message that says the sendobject function is not available now. Then the third situation is when a user with admin rights logs into either a thin client, or web interface, it works fine. So I believe I am looking at a rights issue, but am not sure where to turn. Any help would be appreciated.

Thanks in advance.

 

[ascotta]

Try using filemon and regmon from

http://www.sysinternals.com

. You can run these whilst running the app and it will tell you whee your permission problem is, most times.

[blue]Arguably the best cat skinner around ! [/blue]

Cheers
Scott

 

[Ogi]

Hi,

I'm presuming that the message is on the client device and not on the server?

I'd start at the thin client and see if there is an update and apply that.

Cheers,
Carl.