Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco Rcap for MMI
- Thread starter johnpoole
- Start date
- Thread starter
- #3
VERSION 2621
RELEASE 3
here's the rcap data
RCAP MWI COLP NDI CCBI CCNI PRI DV3I CTI
PR_TRIGS DIV 2 3
CNG 2 3
thanks
and here is the err i get
"An application has requested to send on a QSIG a non-call related
message received on MCDN but the QSIG RCAP is not configured on the
outgoing link or the service is not
supported on QSIG. The message is rejected. Output: DCH or DSL number,
PRI/BRIT type, Service identifier. The following service identifiers
are defined:1. Network ring again2.
Network ACD3. Network Attendant Service4. Network Message Center5.
Trunk Route Optimization6. Network Call Trace7. Remote Virtual
Queuing8. VNS service9. Network Remote Call
Forward10. Network Radio Paging"
john poole
bellsouth business
columbia,sc
RELEASE 3
here's the rcap data
RCAP MWI COLP NDI CCBI CCNI PRI DV3I CTI
PR_TRIGS DIV 2 3
CNG 2 3
thanks
and here is the err i get
"An application has requested to send on a QSIG a non-call related
message received on MCDN but the QSIG RCAP is not configured on the
outgoing link or the service is not
supported on QSIG. The message is rejected. Output: DCH or DSL number,
PRI/BRIT type, Service identifier. The following service identifiers
are defined:1. Network ring again2.
Network ACD3. Network Attendant Service4. Network Message Center5.
Trunk Route Optimization6. Network Call Trace7. Remote Virtual
Queuing8. VNS service9. Network Remote Call
Forward10. Network Radio Paging"
john poole
bellsouth business
columbia,sc
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question