Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco EasyACS and Network Access Restrictions

Status
Not open for further replies.
bibeche

bibeche

ISP
Joined
Apr 17, 2001
Messages
5
Location
DZ
Hi,

I'm using Cisco EasyACS 2.4 for authentication with a cisco router 3640 and 3660.
I want to use Network Access Restrictions for Dial-up PPP sessions.
I must specify the NAS and the port, but the syntaxe is not clear and no example is given on the online documentation.
So, anyone can give me the syntaxe or an example !
Thanks in advance.

Fethi.
 
Status
Not open for further replies.

Similar threads

Blackybear
  • Locked
  • Question Question
Cisco RV042G router
Replies
0
Views
316
Blackybear
Blackybear
CPM86
  • Locked
  • Question Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
556
CPM86
CPM86
B
  • Locked
  • Question Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
399
badwolf1686
B
pbxcomm
  • Locked
  • Question Question
CISCO VG450
Replies
1
Views
810
nt8d09
nt8d09
jobsp90
  • Locked
  • Question Question
I have a issue in my office hospital network regarding using IPPBX software.
Replies
2
Views
515
DavetheChef
DavetheChef

Part and Inventory Search

Sponsor

Back
Top