Folks,
I've used Cisco SDM to setup the above router. Everything works apart from allowing email traffic into the network to a mail server behind the router. The main router has an ip address of xxx.xxx.xxx.xxx and the mx record is one less than this. I used the NAT wizard to set up a static route but it doesnt appear to work. Is there a decent guide to setting up the router/firewall via SDM? Cisco docs are not very good. Also, what command will all icmp pings from the internet to be returned? There must be an acl stopping them on the router.
Regards
Garrett
I've used Cisco SDM to setup the above router. Everything works apart from allowing email traffic into the network to a mail server behind the router. The main router has an ip address of xxx.xxx.xxx.xxx and the mx record is one less than this. I used the NAT wizard to set up a static route but it doesnt appear to work. Is there a decent guide to setting up the router/firewall via SDM? Cisco docs are not very good. Also, what command will all icmp pings from the internet to be returned? There must be an acl stopping them on the router.
Regards
Garrett