Nov 13, 2008 #1 brainey1 Vendor May 5, 2008 57 US Does anyone have any info on getting a Cisco phone working on an IPO with a third party IP endpoint license?
Does anyone have any info on getting a Cisco phone working on an IPO with a third party IP endpoint license?
Nov 13, 2008 #2 Bas1234 Technical User Dec 10, 2007 6,760 NL I've tried my Mini Cooper keys in a Porsche and that didn't work either. ___________________________________________ It works! Now if only I could remember what I did... ___________________________________________ Upvote 0 Downvote
I've tried my Mini Cooper keys in a Porsche and that didn't work either. ___________________________________________ It works! Now if only I could remember what I did... ___________________________________________
Nov 13, 2008 #3 amriddle01 Programmer May 2, 2007 23,938 GB I didn't realise you were a girl bas1234 ACS - IP Office Implement Upvote 0 Downvote
Nov 13, 2008 #4 Bas1234 Technical User Dec 10, 2007 6,760 NL @amriddle01 I own my girlfriends car... @brainey1 You could try with an H323 license. ___________________________________________ It works! Now if only I could remember what I did... ___________________________________________ Upvote 0 Downvote
@amriddle01 I own my girlfriends car... @brainey1 You could try with an H323 license. ___________________________________________ It works! Now if only I could remember what I did... ___________________________________________
Nov 13, 2008 #5 amriddle01 Programmer May 2, 2007 23,938 GB It is possible to do this but the Cisco phones are more expensive and you only get basic telephony when using them on the IP office. ACS - IP Office Implement Upvote 0 Downvote
It is possible to do this but the Cisco phones are more expensive and you only get basic telephony when using them on the IP office. ACS - IP Office Implement
Nov 13, 2008 #6 amriddle01 Programmer May 2, 2007 23,938 GB You will also need to flash the Cisco phone to H323 as they use SCCP "skinny" protocol by default I believe. ACS - IP Office Implement Upvote 0 Downvote
You will also need to flash the Cisco phone to H323 as they use SCCP "skinny" protocol by default I believe. ACS - IP Office Implement
Nov 13, 2008 Thread starter #7 brainey1 Vendor May 5, 2008 57 US Do you have a document explaining how to do this? I have a couple of Cisco phones laying around. Upvote 0 Downvote