Cisco 3750 error

[ChunderPants]

Can someone tell me why I'm getting the following error when trying to save the running config.

TH-37L3#wr

Building configuration...

nv_done: unable to open "flash:/config.text.new"

nv_done: unable to open "flash:/private-config.text.new"

Error writing new block-fs file "flash:/multiple-fs.new"[OK]

 

[burtsbees]

Do a "show flash"---more importantly, have you tried
router#copy run start

Have you tried this? Looks like the way the router saves config files, it writes it to the text files in flash, but they don't exist...let me know how the copy run start goes...we may have a different solution...

Burt

 

[ChunderPants]

TH-37L3#copy run st
Destination filename [startup-config]?
Building configuration...

nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
Error writing new block-fs file "flash:/multiple-fs.new"[OK]

TH-37L3#sh flash

Directory of flash:/

2 -rwx 7394237 Mar 1 1993 00:39:21 +00:00 c3750-ipservices-mz.122-25.SEE.bin
3 -rwx 13824 Nov 15 2006 11:06:04 +00:00 config.text
4 drwx 3776 Mar 1 1993 00:02:47 +00:00 crashinfo_ext
6 drwx 192 Mar 1 1993 00:26:45 +00:00 c3750-ipservices-mz.122-25.SEB4
5 -rwx 512 Mar 4 1993 22:28:51 +00:00 multiple-fs.new
363 -rwx 1036 Mar 1 1993 00:02:43 +00:00 vlan.dat
364 -rwx 1048 Oct 6 2006 09:36:42 +00:00 multiple-fs
366 drwx 12608 Mar 1 1993 00:02:32 +00:00 crashinfo

32514048 bytes total (0 bytes free)

 

[burtsbees]

32514048 bytes total (0 bytes free)

It can't write a new config with 0 bytes free.

Burt

 

[ChunderPants]

ok thanks. Can you tell me how I go about freeing up space then. Are all these files needed? Can I delete some to free up space?

Cheers

 

[burtsbees]

Well, I would say the crashinfo is no longer needed---if there is ever any question you can free up space by backing the files up to a tftp server.

Burt

 

[vipergg]

Find out which version of code it is currently using then get rid of the other that will free up a ton of space. Looks like the seb4 is the old code so you would delete that directory that it is in .

 

[chipk]

To verify, do a show version, it will tell you which image you are using.