I have a Cisco 3005 VPN concentrator, which I would like to access remotely over the internet so I may configure it for our out-of-state branch of the company. The remote VPN concentrator, has minimal configuration settings, and does not allow vpn clients to log in yet. The firewall is curently unrestricted, and the VPN concentrator is the only device on the remote network currently. I would like to be able to put the public adress of the remote network (http:\\xxx.xxx.xxx.xxx) and be able to access the web management tool built into the VPN concentrator. Assuming that firewalls, are not an issue, can this be done? If so, how?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco 3005 - How can I remotely administor it?
- Thread starter deep9
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Solved