cisco 2801 capacity / growth???'s

[rmktech]

hello, i have a customer that may be inheriting a cisco 2801 with the following other equipment. My question is what is the max lines and stations this system can go to?

pvdm2-16 ? compresssion mod
vwic-1mft-t1 ? t1 mod
vic2-4fxo ? 4 line module
aim-cue 12 mb licen
extra 25 lic mb
sau pkg2 ==?
sau pkg4 ===?
snt-pkg1 === ?
7960 g ip phone w/ lic
7902g ip phone. w/ lic


As i see this, it is a 24 ext(IP) based system with a t1 and 4 lines comming in.

But hey I DON't KNOW CISCO!!!

what is this stuff.

They will need about 1 or 2 t1's and about 75-85 ext.

thanks

Ron k.

 

[burtsbees]

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/ioh/ic/vwicmfet.htm

That's a voice WAN interface card, the vwic-1mft-t1...

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/ioh/ic/vic_fxo.pdf

That will tell you about the vic2-4fxo...

http://www.cisco.com/en/US/products/ps5855/products_data_sheet0900aecd8016e845.html

that's for the pvdm2-16...
Packaged Software Application Support Plus Ugrds--Category2 is the sau pkg4...

http://www.digitalsurplus.com/smart.htm---this

is where the package info can be found, or at least a description for further searches...
The 7960 and 7902 are VoIP phones...if you need a good Ebook on Cisco VoIP, you can email me at burt_bees@yahoo.com
Hope this helps...

Burt