I'm redesigning my home lan for my learning purposes. Basicaly I have a cisco 2514 as my border router. I also have a linksys wrt54g behind the 2514. I basically have a switch and I've connected the 2514's EO to the switch and I've also connected the wan interface of the linksys to the switch also. My problem is surfing speeds I have a 3meg pipe and I'm only getting 1458 down. When IO have nothing but the linksys in place I average 2889 down. What am I missing after all the 2514 has 10meg interface so I thought it could handle the traffic.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
cisco 2514 and cable modem
- Thread starter watts3000
- Start date
Firstly, check the duplex settings on the C2514...you probably have it set for 10M Full duplex...make sure the settings on the C2514 & your switch match.
-
From the description of your problem , it looks like a duplex mismatch that needs to be corrected on your switch.
-
From the description of your problem , it looks like a duplex mismatch that needs to be corrected on your switch.
- Status
