Cisco 2507 router/hub

[odipo25]

Hi,

I have a cisco 2507 router with inbuilt 16port ether hub.

I can monitor MAC addresses and connections of hosts/Pc's on each port using 'show hub ether 0-1..e.t.c'

I have connected an 8 port switch with 6 hosts/Pc's on one of the ether ports. (port 0 14)

When I monitor that port it only shows me the MAC address of only one host/Pc YET I have 6 Pc's on that switch which is connected to this port.

What command/software do I need to use so as to see all the 6 MAC addresses/connections coming through this port ?

thx

 

[jgercken]

It's a hub, not a switch so it doesn't keep track of the host MAC addresses (no CAM table). The one you're seeing is probably the router's management interface. What is the MAC you're seeing? Look up the first half (vendor code) here:

http://www.coffer.com/mac_find/?string=

-Jeff

----------------------------------------
Wassabi Pop Tarts! Write Kellogs today!