Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco 1600 to Factory Defaults?
- Thread starter cdove
- Start date
thunderbug66
Technical User
if you can get into the router's enable mode, type:
erase start
reload
this will erase the start-up config and reload will cause it to reboot to the factory defaults
if you cant get in to the routers enable mode, then follow the instructions here:
--jel
erase start
reload
this will erase the start-up config and reload will cause it to reboot to the factory defaults
if you cant get in to the routers enable mode, then follow the instructions here:
--jel
- Status
