cics 7.0 and analog sets 2

[Rickg47]

For 2 analog dn's on a cics 7.0 do you just have add 2 ata's to 2 digital ports? There is programming of course, but are there any specific ports? If so is there a paticular type of ata you should use?

 

[MarvO1]

Any port, but the CICS has 1 built in analog port already, so you would only need to add 1 more ATA unless you are already using the IATA port.

MarvO said it

 

[MarvO1]

Forgot to mention, the built in ATA is on the Yellow/Slate pair of the LINES connector.

MarvO said it

 

[RikRodgers]

Use an "ATA2" for the second extension.