Changing the IP adress of an AES server

[Sterrenjager]

Hi all,

I need to change the Ip adress of an AES server (4.0), this could be done by the commandline. Does anyone know what the command is, because I can't remember it.

And I don't want to reïnstall the complete software.

Hope to hear from someone.

Ronald

 

[simreal]

When you telnet to the AES you can run the "netconfig" command from the command prompt. It will open the "Configure Network Interfaces" screen.

You will need to change the adress in the Avaya as well.


If I recall this also requires a reboot of the AES.