Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing the Circuit State

Status
Not open for further replies.
campyracr

campyracr

IS-IT--Management
Jun 25, 2002
288
US
I have an ARN...a few actually.

One was working for a while. Today it started acting flaking, not passgin DHCP requests etc. Then when I connected with the console cable & Typed sho ip cir it showed:
[1:1]$ sho ip cir
Circuit Circuit # State IP Address Mask
-------- ----------- -------- ---------------- ----------------
E01T 1 Up xxx.xx.xx.xxx 255.255.255.0
E01B 2 Down xxx.xxx.xx.x 255.255.255.0

I thought it was the config, so I reverted to a backup copy, and then to an alternate config all together. same result. Circuit 2 appears "down"

I even changed the router & booted into various configs with the same result.
 
Status
Not open for further replies.

Similar threads

Venky96
  • Locked
  • Question
Hello All, We have the problem
Replies
1
Views
572
ipohead
ipohead
khalil naheet
  • Locked
  • Question
My call come back to the oprator
Replies
1
Views
594
ipohead
ipohead
Michel$
  • Locked
  • Question
hi guys, After upgrading System Manager Communication Manager and Session Manager versions 8.1 to 10.2 SIP device phones display the error message "n
Replies
0
Views
633
Michel$
Michel$
RobProserv
  • Locked
  • Question
J169 ethernet port stop working all of a sudden. Reboot fixes the issue. Any thoughts on why?
Replies
0
Views
478
RobProserv
RobProserv
sugu1
  • Locked
  • Question
Audio Code M2K - error No circuit available
Replies
0
Views
147
sugu1
sugu1

Part and Inventory Search

Sponsor

Back
Top