Changing DN's from 2 digit to 3 digit?

[DOcean]

What is the easiest way to do this? Some mo-mo set up my client's CICS with 2 digit DN's...but I need to set up Hunt Groups and need 3 digit DN's. Must I do a "system start-up"?

 

[MarvO1]

You should be fine to change it on the fly. Just don't go backwards from 3 to 2. I have never had a problem when increasing the length. No reason to have to do a startup.

MarvO said it

 

[DOcean]

Change it by using the old/new DN setting?

 

[silver987]

Under system programing, you will find dn lenth.

Good luck

http://www.silverlakecom.com

 

[DOcean]

Thanks.

 

[MarvO1]

NO,
There is a setting under SYSTEM PROGRAMMING called DN LENGTH.
I believe Hunt Groups were introduced with 4.0 software. I can verify that when I bet back to the office.

MarvO said it

 

[DOcean]

The system is 6.*.

I didn't know you could just change DN length without repercussion.

Thanks, all.

 

[MarvO1]

Sorry silver987, looks like we were all posting at the same time. Didn't mean to step on ya.
DOcean, the only problem is if you have voice mail on the system.

MarvO said it

 

[DOcean]

I do have voicemail (CP100). Will have to re-do all the mailboxes, yes?

 

[DOcean]

Oops...figured it out. Had to re-initialize the CallPilot...all is well.

Thanks again!

D. Ocean
Miami, FLA