Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changer hardware

Status
Not open for further replies.
allreds

allreds

MIS
Joined
Feb 23, 2001
Messages
2
Location
US
I'm running Backup Exec 7.3 and receiving the error message "the changer hardware is in the incorrect mode" when I attempt to submit/run a cleaning job. I've been unable to find a solution to this problem. Can anyone help?
 
Status
Not open for further replies.

Similar threads

Martha_SysAdm
  • Locked
  • Question Question
Which hardware and software can i consider for Backup and Disaster recovery
Replies
3
Views
1K
goombawaho
goombawaho
intel233
  • Locked
  • Question Question
Auto Changer disabled/nsrlcpd is not running for this jukebox
Replies
3
Views
675
intel233
intel233
disturbedone
  • Locked
  • Question Question
Cleaning - software or hardware?
Replies
2
Views
294
disturbedone
disturbedone
Hackeber
  • Locked
  • Question Question
ARCServe Unloading Changer.nlm after it was sucessfully loaded. ( New at this )
Replies
0
Views
156
Hackeber
Hackeber
smicro
  • Locked
  • Question Question
Hardware Tape Compression
Replies
0
Views
191
smicro
smicro

Part and Inventory Search

Sponsor

Back
Top