Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change Target Line
- Thread starter StopGo
- Start date
jerryreeve
Vendor
you have two things that need to be done to change a target line, in terminals and sets you can assign the target line to ring only, appear and ring or appear only. then in lines you can assign the DN as the PRIME DN and/or the callerid set.
----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com
----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com
- Status
Similar threads
- Locked
- Question
