Change Partition-Route-Table

[Ronster]

Can someone explain to me the Partition Routing Table in V9?

Previously when I wanted to use partitioning I could do change ars analysis 0 partition 2. Now when I type change ars analysis 0 and press the help key there are no options for partition.

Does this mean we don't have partitioning, or do I use change partition-route-table 2?.. and if so, how?

Thanks in advance,

Ronnie

 

[G van Hamburg]

Ronster,

They changed somthing in this part of the Definity to make it easier.

If you do a "list ars an" you'll see that the route patterns can be p1, p2 etc. This means that for further processing you have to look at that partition route table.

In the COR is managed which TOD is used and in the TOD there's written which partition is used at what time.

At the end the actual routepattern decide's what to do with the call.


hope this makes sence, otherwise give a shout.

 

[Ronster]

Thanks B,

Got it sorted. Found it in the documentation but your tip pointed me in the right direction.

Cheers


Ronnie