Change length of ~p pause in autodial

[wmainc]

I have a customer with a Definity V9 that uses autodial buttons to access voicemail. One ~p used to be perfect with their Definity Audix. After changing to a different VM system, one ~p isn't long enough, and two is just a bit longer than needed. What setting is it that determines the time of the ~p pause?

 

[smokinjoe2938]

you can not change this value as far as I know, sorry.

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.

 

[phoneguy55]

Use ~p~p

or ~p~p~p

 

[smokinjoe2938]

thats not what he is asking for, that will only add more pause, he wants to change the default value and I believe it is set at 1.5 seconds per ~p
value

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.

 

[AvayaTier3]

These work and cannot be changed:

Valid entries Usage
Digits 0 to 9 Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~p Pause 1.5 seconds
~w Wait for dial tone
~m Change to outpulse DTMF digits at the end-to-end rate
~s Start suppressing display of the digits being outpulsed
~W Wait indefinitely for dial tone. Use this only if network response time is
more than 30 seconds. Not available for S8300 Servers.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]