Change Ip addresses on a OPt 81 and Call Pilot

[blue31]

I have been told that I will have to change the IP adresses
on a Opt 81 and call pilot. Can someone give me some guidance how to do this procedure.

 

[DFKSydney]

Call Pilot is easy enough..... run the config wiz, change the appropriate parameters (Elan) and boot at the end.

The PABX is a bit more awkward..... depends on the Rel software, and if Linux or VX based.

Also, apart from the IP address, are you changing the subnet and gateway??

 

[blue31]

The rls on the opt 81 is 4.0