Change ds1 Connect from PBX to Network

[dgillson]

I want to re-use a ds1 board currently connected to an MCU " no longer in use"

Can I simply change the connect type from PBX to Network and attach it the the new carier PRI?

on change ds1 command ---I get a warning " check implementation manual,changing this field my cause corruption

 

[4merAvaya]

If the board is spare just do a 'remove ds1 [slot]. That way you won't risk corruption. The board must have no translations on it (ports assigned, signaling groups, etc.).

Kevin

 

[dgillson]

I want to use it for a new PRI coming in from the carrier.

do you still recommend I remove it and then add it back in.

 

[gblucas]

Always, or risk data corruption...

gblucas

 

[dgillson]

Got it - Thank guy's

 

[dgillson]

Sorry - another question on this procedure --

there is currently a lot of administration associated with this DS1 , SP-Link 2 , sig group 2 , there is a PI-Ext 289.
Is it still OK to simply " remove ds1" ?