Change Analog 500 set from COT to DID

[cardinalGLZ]

Hello,
I'm trying to take an existing DN and change it from a private line to DID... Unsure on the easiest way to do this. Option 11C

For Example:
DN 5329 is currently supplied by a Channel bank dedicated analog line with power fail-over.

I'm opting to go with a DID supplied and remove the power fail-over... How do I change this?

Thanks!

 

[cardinalGLZ]

Also wanted to mention that I have a cutover next week and the Telco provider will now be sending external number as a DID instead of analog.

 

[norstarboy125]

Is it currently a pvr? If so just out it and build new.

Charm City Communications

http://www.charmcitycommunications.com

 

[GHTROUT]

If 5329 is currently an SCR, then you are done. If it is only a PVR, then you have to NUL that KEY and add 5329 as an SCR: KEY 00 SCR 5329

~~
Gene at www.GHTROUT.com

 

[cardinalGLZ]

Hello,
Thanks for the responses... Here is my TN info on the 5329 DN...

NACT
REQ: prt
TYPE: tn
TYPE TNB
TN 18 02
DATE
PAGE
DES

DES ALOG
TN 018 0 00 02
TYPE 500
CDEN 8D
CUST 0
WRLS NO
DN 5329 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
MCRD
EXR0 SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD FTTC
PLEV 02
AACS NO
MLWU_LANG 0
DATE 8 JUN 2005


NACT

***** Unsure on how to route and incoming DID to this DN...

Thanks!