Cha IP Address on Avaya IR

[NewbieCarol]

Does anyone know how to change the ip address of an Avaya IR 1.2 Sunfire 280R r1.22 running Avaya IVR Core Solaris 8, Update 7?

thanks,
carol

 

[4merAvaya]

I'm not familiar with the IR product, but if it's running Solaris, similar to CMS, there is a file, /etc/hosts, that contains all of the IP addresses.

Kevin

 

[NewbieCarol]

Thank you Kevin. I'll take all the help i can get.

 

[archer1300]

The following are the steps needed to point an Avaya IR to a back-up host server. I'm assuming your IR is running the cleo tn3270 client.

The following are the steps to re-configure the IR tn3270 connection to point to either the Back-up Gateways in "X" Location or to the Primary Gateways in "X" Location.

Begin the process by typing the following

• hlogout xxxxxxx (xxxx=application name)
• hfree xxxxxx (xxx=application name)
• stop_vs

Once the system has stopped type the following:

• tnconfig -h NN.NN.N.NN -n 96 (Where NN.NN.N.NN is the IP for the server) (96 is the number of ports)

After issuing the tnconfig command, go to the directory /cleo and type the following:

• cp tn3270a.new tn3270-1a.txt

Then type:

• cp tn3270b.new tn3270-1b.txt

At this point restart the voice system. Once the voice system started reassign the application to the host channels by typing the following:

• hassign xxxxxx to all (xxxx=application name)


To view the host connection type the following:

• hstatus all |pg