cfgadm -c unconfigure a fiber tape drive

[tuka]

I get a "not supported msg" when using this command to unconfigure a drive.

cfgadm -f -c unconfigure c10::500507630040cb12

configuration operation not supported

I didn't stop the NBU's daemons and I am thinking this might be the reason for the message.

Does anyone have an input:

Thanks

 

[creakyjoe]

'fraid i've only done that stuff on our SAN disks, not on tape drives.

 

[comtec17]

You can only run cfgadm for disk drives, not tape.

 

[creakyjoe]

that'll be why then