CF Studio 4.5.2 Memory Error

[sjunkie]

I have a user running Windows 2000 SP2 and ColdFusion Studio 4.5.2 who gets a Memory Error and Out of Memory Error while expanding memory stream whenever she tries to do an Extended Replace. We've rebuilt the machine and checked the RAM and it's fine. We also tested this on another machine with similar hardware running the same OS and got the exact same error. I could not find this error message anywhere on Allaire's site, but this is clearly a ColdFusion error message (as shown in the screen shots provided by the user to me and as observed in testing).

Any help would be greatly appreciated.

 

[calista]

This is just a shot in the dark, but do you have both service packs for CF 4.5.1? Calista :-X
Jedi Knight,
Champion of the Force

 

[sjunkie]

Yes. I tried it without and with each service pack in sequence. No improvement. It's really bizarre and she cannot use these functions in CF. She has a ton of memory, huge page file, huge hard drive. We even rebuilt her machine because we thought it was a problem with the OS.

Thanks for responding. I'd welcome any other ideas you might have.

Sheree

 

[calista]

OK, next guess. Go into CF Administrator(on user machine) and try raising the amount of cache. You might also check "Trusted Cache".

BTW, I'm running Studio 5.0 on a Win2K machine. Calista :-X
Jedi Knight,
Champion of the Force