butchrecon
MIS
Hi everyone. I recently Re-installed Win2K Pro on my machine (I replaced my main board and was having problems). Everything seemed ok until I went to make a CD. Now My CDR is a Mitsumi CR-4801TE (IDE). I have flashed the firmware on it. It reads CD's ok, plays them and I can access them. It even recognizes I input a CDR. So I can do everything I need to. Prepare files for copy and select what speed. and start the copy process. Thats when it takes a nose dive. The R/W light stays green (Its supposed to turn RED when it copies) and the application freezes. Windows does not lock up just the CDR and application. I have tried Adaptect EZ CD creator 4.02, Nero 5 and CD Burn. All same results. I have to note this thing was fine until I replaced my main board and reinstalled Win2K. Any one have any thoughts on it. I have been fighting it for 2 weeks and am tired of fighting. I cant afford to purchase another.
System Specs are:
PIII 800EB
512Meg PC133
Microstar MS-6337LE5 (815EPT Lite) With onboard Sound.
Adaptec 2940 UW
20 Gig IDE ata100 Seagate (primary master)
CDR (Secondary master)
Creative 6X DVD (Secondary Slave)
2 9 Gig WD SCSI hard Drives.
TNT2 Video running 4X
External 56K modem
PCI ethernet card.
James Collins
Systems Support Engineer
A+, MCP
email: butchrecon@skyenet.net
Please let us (Tek-tips members) know if the solutions we provide are helpful to you. Not only do they help you but they may help others.
System Specs are:
PIII 800EB
512Meg PC133
Microstar MS-6337LE5 (815EPT Lite) With onboard Sound.
Adaptec 2940 UW
20 Gig IDE ata100 Seagate (primary master)
CDR (Secondary master)
Creative 6X DVD (Secondary Slave)
2 9 Gig WD SCSI hard Drives.
TNT2 Video running 4X
External 56K modem
PCI ethernet card.
James Collins
Systems Support Engineer
A+, MCP
email: butchrecon@skyenet.net
Please let us (Tek-tips members) know if the solutions we provide are helpful to you. Not only do they help you but they may help others.