CDR on CS1000E

[dlesap]

Hello

Does anyone already tried to set up a CDR port on CS1000E?
That CS1000E doesn't have a CS1000T associated. All in and out calls goes through H323 trunks.
Regarding that design, i need to have the CDR on CS1000E. Nortel provide a MRV box for that purpose. I still have the same problem with that MRV box. It works fine until the MRV is restarting. Please read thread798-1196463 for details.

Any suggestion welcome

 

[johnpoole]

i would save my cdr to a share drive, the mvr box is a pain you don't need.. here's a short and simple script i hav used to capture streaming data//


proc main
loop:
capture on
pause 36000 ;number of seconds per file
capture off

goto loop
end proc


john poole
bellsouth business
columbia,sc

 

[dlesap]

John
The problem is to have the CDR going out the PBX. On 1000E there is no TTY...except the one from CPU that doesn't support to have CDR...
The application Avotus for CDR is not able to retrieve CDR from PBX buffer as OTM does.

I speak about a MRV box not mvr(?)

Any other ideas??