I have an win xp comp with a LG 48X Writer when I go to Rite to a CD Nero give me the Following error
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 25/08/1999 12:55:32
ahead WinASPI: File 'D:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 22:37:36
Nero Version: 5.5.10.28
Recorder: <HL-DT-ST CD-RW GCE-8480B>Version: 1.04 - HA 1 TA 1 - 5.5.10.28
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: X004 - HA 1 TA 0 - 5.5.10.28
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MPE3064AT atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8480B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 2 ID 0 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 250MB (256764kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
14.9.2003
CD-ROM (ISO)
23:50:38 #1 Text 0 File Isodoc.cpp, Line 7579
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23:50:38 #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated
23:50:38 #3 Text 0 File Reader.cpp, Line 115
Reader running
23:50:38 #4 Text 0 File Writer.cpp, Line 125
Writer HL-DT-ST CD-RW GCE-8480B running
23:50:38 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
23:50:39 #6 Text 0 File Burncd.cpp, Line 3735
Turn on Track-At-Once, using CD-R/RW media
23:50:39 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 344078 (344078) = #344078/76:27.53
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
23:50:39 #8 Text 0 File DlgWaitCD.cpp, Line 221
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 344077 (76:29.52)
23:50:39 #9 Text 0 File DlgWaitCD.cpp, Line 226
Write in overburning mode: FALSE
23:50:39 #10 Text 0 File DlgWaitCD.cpp, Line 1678
Recorder: HL-DT-ST CD-RW GCE-8480B;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
23:50:39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder HL-DT-ST CD-RW GCE-8480B for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x0, ISRC "", FilePos 0 307200 704978944
23:50:39 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
23:50:39 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 344078 (344078) = #344078/76:27.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks, length 344076 blocks [HL-DT-ST CD-RW GCE-8480B ]
--------------------------------------------------------------
23:50:39 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
23:50:44 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
23:50:44 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 48x (7,200 KB/s)
23:50:44 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
23:50:44 #18 Text 0 File Mmc.cpp, Line 17895
Set BUFE: supported -> ON
23:51:33 #19 SCSI -1135 File Cdrdrv.cpp, Line 1416
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02C10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x99 0x6D 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
23:51:33 #20 MMC -1135 File Writer.cpp, Line 333
Write error
23:51:33 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
23:51:33 #22 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
23:51:33 #23 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state
23:51:33 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack
23:51:33 #25 Text 0 File Mmc.cpp, Line 12895
<HL-DT-STCD-RW GCE-8480B > start Close Session
23:51:55 #26 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 48x (7,200 KB/s)
23:51:55 #27 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 13/01/2003 10:19:26
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 21/10/2002 09:33:40 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 13:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So then I tryed Easy CD Creater 6 and go the following error:
E80041898: Write Error - [03/0C/00]
E80041899: Write error - buffer underrun occurred - [06/C5/00]
E80041925: TrackWriter error - Command retry failed - [T7118]
I allways use the Write with the Buffer Underrun Protection on it so I cant get a buffer underrun
Can any one help me
thanks
________________________________________
I help Where I can
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 25/08/1999 12:55:32
ahead WinASPI: File 'D:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 22:37:36
Nero Version: 5.5.10.28
Recorder: <HL-DT-ST CD-RW GCE-8480B>Version: 1.04 - HA 1 TA 1 - 5.5.10.28
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: X004 - HA 1 TA 0 - 5.5.10.28
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MPE3064AT atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8480B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 2 ID 0 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 250MB (256764kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
14.9.2003
CD-ROM (ISO)
23:50:38 #1 Text 0 File Isodoc.cpp, Line 7579
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23:50:38 #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated
23:50:38 #3 Text 0 File Reader.cpp, Line 115
Reader running
23:50:38 #4 Text 0 File Writer.cpp, Line 125
Writer HL-DT-ST CD-RW GCE-8480B running
23:50:38 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
23:50:39 #6 Text 0 File Burncd.cpp, Line 3735
Turn on Track-At-Once, using CD-R/RW media
23:50:39 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 344078 (344078) = #344078/76:27.53
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
23:50:39 #8 Text 0 File DlgWaitCD.cpp, Line 221
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 344077 (76:29.52)
23:50:39 #9 Text 0 File DlgWaitCD.cpp, Line 226
Write in overburning mode: FALSE
23:50:39 #10 Text 0 File DlgWaitCD.cpp, Line 1678
Recorder: HL-DT-ST CD-RW GCE-8480B;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
23:50:39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder HL-DT-ST CD-RW GCE-8480B for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x0, ISRC "", FilePos 0 307200 704978944
23:50:39 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
23:50:39 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 344078 (344078) = #344078/76:27.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks, length 344076 blocks [HL-DT-ST CD-RW GCE-8480B ]
--------------------------------------------------------------
23:50:39 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
23:50:44 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
23:50:44 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 48x (7,200 KB/s)
23:50:44 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
23:50:44 #18 Text 0 File Mmc.cpp, Line 17895
Set BUFE: supported -> ON
23:51:33 #19 SCSI -1135 File Cdrdrv.cpp, Line 1416
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02C10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x99 0x6D 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
23:51:33 #20 MMC -1135 File Writer.cpp, Line 333
Write error
23:51:33 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
23:51:33 #22 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
23:51:33 #23 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state
23:51:33 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack
23:51:33 #25 Text 0 File Mmc.cpp, Line 12895
<HL-DT-STCD-RW GCE-8480B > start Close Session
23:51:55 #26 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 48x (7,200 KB/s)
23:51:55 #27 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 13/01/2003 10:19:26
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 21/10/2002 09:33:40 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 13:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So then I tryed Easy CD Creater 6 and go the following error:
E80041898: Write Error - [03/0C/00]
E80041899: Write error - buffer underrun occurred - [06/C5/00]
E80041925: TrackWriter error - Command retry failed - [T7118]
I allways use the Write with the Buffer Underrun Protection on it so I cant get a buffer underrun
Can any one help me
thanks
________________________________________
I help Where I can
