Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cd rom and cd-rw

Status
Not open for further replies.

lara19

Technical User
Feb 5, 2003
157
PH
My cd-rom and cd rw disappeared from my computer, When i reboot it appears again. How can i fix this problem. Im using win xp pro. Thanks
 
This was happening to a friend on mine's PC. he had a dvd and a dvd/rw. Turns out it was the DVD/RW drive was bad. Sometimes when he booted both drives were there,next time,neither would be there...took the dvd/rw back for a different one...been ok since then.
 
Also might want to check that jumpers are set right, slave for the middle connector,master for the end. And check that the cable is good,also.
 
The connection is ok, this happened after i reformat my comp. is this a registry problem?
 
are they visable in the bios during boot even when they don't show up in windows? If they are need seen during post,this points to a hardware problem. I would still try one at a time to see if I coulc get to act up with one of the drives and not the other. When you reloaded the system did the ide controller get loaded ok?
 
Yes the ide controller get loaded. The drive disappears if i try to put a cd on the drive(CD_RW) and the drive cant read it.
 
Check your dma settings for the drives. almost sounds like an irq conflict is knocking the drive out of the OS.
 
IF you only have one of the drives connected,does it do this? As for a registry issue if you are good you may find something,but running a program like system works is easier. and other then an aspi problem, can think of nothing in windows that would cause this problem. Is there any thing listed in event viewer,or error logs?
 
both myself and my neighbour are having the same proble. my neighbour has been through 4 cd-roms and came to the conclusion it is a software problem not a hardware prob. when checked our drivs work fine in other pc's. been asking around and seems to be fairly common problem with windows 98, not sure if this is coincidence or fault. any help is always appreciated
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top