Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CD and Floppy do not work

Status
Not open for further replies.

stlytm

Technical User
Apr 19, 2005
3
US
When trying to read the cd, I get the message "Device Not Ready" and autorun does not start the cd. When trying to use the floppy it freezes the computer. Anyone know of an easy to fix these.

Tom
 
Make sure the cables for both drives are securely connected.

If ok, then install different known working cables, and connect different power leads.

If no luck, then install a different known working CD-ROM drive.
If that fixes things, then yours is bad.

If no luck, then install a different known working FD.
If that works, then yours is bad.

If replacing both drives one at a time does not work, then both of your drives may be bad.
This is not a usual occurrence, but I've seen it happen a few times.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top