CAUSE :INVALID IE CONTENTS error on PRI

[chrislxx]

Hi
Thank you in advance for any help
I am installing a new PRI with ATT
I have a opt 11 rls 25
I have a NTAK93 so i can only NATL is not an option
ATT is a DMS 100 set for 5ESS
I can receive calls but when I call out I get
*******************************************************
DCH 11 IMSG REL COMP REF 00000017 CH 1 23 TOD 5:18:32
CAUSE :INVALID IE CONTENTS
*********************************************************
My RDB and ADAN is posted below.



REQ PRT
TYPE:

TYPE RDB
CUST 0

ROUT 0


TYPE RDB
CUST 00
DMOD
ROUT 0
DES LOCAL_ATT
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC ESS5
SBN NO
PNI 00000
SRVC SDN
NCNA YES
NCRD NO
CHTY BCH
ISAR NO
CPUB OFF
DAPC NO
BCOT 0
DSEL VCE
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH RRB
TRMB YES
STEP
ACOD 6001
TCPP NO
PII NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO


PAGE 002

MUS NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0


REQ prt

TYPE adan



ADAN DCH 11
CTYP DCHI
CARD 01
PORT 1
DES ATTPRI
USR PRI
DCHL 1
OTBF 32
DRAT 64KC
CLOK EXT
IFC ESS5
SIDE USR
CNEG 1
RLS ID **
RCAP
MBGA NO
OVLR NO
OVLS NO
T23 20
T200 3
T203 10
N200 3
N201 260
K 7

 

[johnpoole]

how are you trying to dial out?

try the acod plus the number or ac plus the number? when do you get the busy.. after 9+ after acod+ or after the last digit... is route 0 in your route list block?

john poole
bellsouth business
columbia,sc

 

[chrislxx]

Thank you for responding, I have tried the ACOD plus the number or 9 + the number.
The calls fail the same either way.
Below is the RLI info
Thank you for any help.

REQ prt
CUST 0
FEAT rlb
RLI 0

RLI 0
ENTR 0
LTER NO
ROUT 0
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
FSNI 0
SBOC NRR
OHQ NO
CBQ NO

ISET 0
NALT 5
MFRL 0
OVLL 0

 

[hawks]

Can you try to set the protocol to ess4.

 

[chrislxx]

I tried ESS4 with the same result

DCH 11 OMSG SETUP REF 00000017 CH 1 23 TOD 23:22:52
CALLING #:3037493800 NUM PLAN: E164
CALLED #:18185584200 NUM PLAN: E164

DCH 11 IMSG REL COMP REF 00000017 CH 1 23 TOD 23:22:52
CAUSE :INVALID IE CONTENTS

Thank you

Chris

 

[chrislxx]

Update new info from telco

They are telling me that I need to send E164 National

I am sending E163 national/telephony

I have tried to change in LD 15 I was able to add E164 but E163 still remains and I can get rid of it

chris

 

[PERRYPJ]

I have both in my CDB

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[hawks]

I got the following from thread798-1483697

"Thanks to everyone that replied. The provider had to change the Dchannel protocol to DMS100 to get it to work. I don't know why. I've been able to use ESS5 many times before.

 

[chrislxx]

I tried that as well but no luck.

3rd level support ATT now thinks it is a DMS100 switch problem and is moving to different equiptment.

i has to change to ESS4 to get it to do E164 as recomended earlyer, wile it did not fix the problem it got ATT it think it was their problem.

hope they can get it!

Thanks all if no luck with ATT i will be back

 

[chrislxx]

Thanks everyone

this ended up as a TELCO problem

Chris