Hello!
I have here two Catalyst 4510R with 2 SUP-V (Chassis A) in one of them and 1 SUP-V (Chassis B) in the other (will buy another SUP when we have money for it). I will use the two fiberports as uplink between those two switches (PAgP, boosting 2Gb). Now the 2nd Supervisor in Chassis-A is in standby mode and I want to make the most out of it. Can I use both supervisors (1 fibermodule from each) to uplink to the single Supervisor module on Chassis-B?
SUP-1-A ----
\
<---TRUNK--> ---- SUP-1-B
SUP-2-A ---- /
Regars,
CiscoJohn
I have here two Catalyst 4510R with 2 SUP-V (Chassis A) in one of them and 1 SUP-V (Chassis B) in the other (will buy another SUP when we have money for it). I will use the two fiberports as uplink between those two switches (PAgP, boosting 2Gb). Now the 2nd Supervisor in Chassis-A is in standby mode and I want to make the most out of it. Can I use both supervisors (1 fibermodule from each) to uplink to the single Supervisor module on Chassis-B?
SUP-1-A ----
\
<---TRUNK--> ---- SUP-1-B
SUP-2-A ---- /
Regars,
CiscoJohn
