Can't use spare TNs

[AndyRothgen]

Please help out a numpty who isn't familiar with these systems.

I'm doing LUVU for spare TNs, using the correct type for the phone, 2002P2.
But when I put the TN into the phone I still get an InvalidTN error.

I've been through the config on the phone & it's identical to a working one, so I assume I'm picking the wrong TNs somehow.

 

[Firebird Scrambler]

Hello Andy

Are you able to print off the TN details for the phone that you are trying to configure please?.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[AndyRothgen]

REQ: prt
TYPE: tnb
TN 100 0 5 14
DATE
PAGE
DES

SCH0805


Which suggests it's not setup to me. However I've tried

REQ: cpy 1
TYPE: 2002p2
CFTN 100 1 9 30
DES 2002P2

*** MAKE PRINTER READY ***
TN 100 0 5 14
DN 8908
SCH3300
DN
SCH3300
DN
SCH3300
DN 8908
SCH3300
DN
SCH3300
DN ***

To copy a working TN to it & assign the DN of the broken phone it's replacing & that doesn't work.

Thanks for the hint, I'd forgot the TN needs setting up to start with.

 

[KCFLHRC]

It appears that the issue is with the DN and not the TN. It looks like DN 8908 is already in use. That is why it wont let you copy it.

 

[Firebird Scrambler]

Hello Andy

Try using a unused DN as it won't allow you to use an existing DN.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[AndyRothgen]

Thanks guys, I assumed copying a existing DN would port the number over.

Does that explain why putting the TN on the phone gives an invalid TN error? Because the TN needs setting up with the copy command?

 

[KCFLHRC]

The TN needs set up first to be valid.

 

[AndyRothgen]

Sorted, thanks for the guidance.

I'll post today's dumb question it's own thread.