Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can't type $
- Thread starter Allar
- Start date
CHR$(34) is best generated from the keyboard with SHIFT + $
(I guess it depends on the keyboard.)
Alt255@Vorpalcom.Intranets.com
"The bottom line is that almost all software ships with significant bugs and performance limitations."
Michael Spertus in Software Development Times
(I guess it depends on the keyboard.)
Alt255@Vorpalcom.Intranets.com
"The bottom line is that almost all software ships with significant bugs and performance limitations."
Michael Spertus in Software Development Times
Guest_imported
New member
- Jan 1, 1970
- 0
Hello Allar,
You might have the answer to your situation by now regarding "typing $s in Qbasic" but if not.
Using the following command should allow you to enter a dollar during input.
LINE INPUT "Enter Your $",D$
I hope this helps
You might have the answer to your situation by now regarding "typing $s in Qbasic" but if not.
Using the following command should allow you to enter a dollar during input.
LINE INPUT "Enter Your $",D$
I hope this helps
Allar,
On my (Canadian) keyboard, and on most keyboards in North America, a $ sign is typed with Shift-4. I don't know if this applies to your keyboard or not.
If not, another thing you could try is holding down the Alt key while typing 36 on the numeric keypad (the array of 3x3 numbers typically below the Num Lock, Caps Lock and Scroll Lock LEDs, on the far right end of the keyboard).
Other than this, I don't know enough about your keyboard or your locale to be more specific
On my (Canadian) keyboard, and on most keyboards in North America, a $ sign is typed with Shift-4. I don't know if this applies to your keyboard or not.
If not, another thing you could try is holding down the Alt key while typing 36 on the numeric keypad (the array of 3x3 numbers typically below the Num Lock, Caps Lock and Scroll Lock LEDs, on the far right end of the keyboard).
Other than this, I don't know enough about your keyboard or your locale to be more specific
- Status