Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't take the IP via DHCP. 1

Status
Not open for further replies.

yamcha

Technical User
Jan 31, 2001
76
MX
Hi Friends.

I'am from Mexico and Sorry for my bad english.

I have 2 Win XP Pro installed, and both pc's take the ip adress with a DHCP 192.168.1.xxx, this service is included on my ZONET Router wich access the internet as well.
Today i start 1 Pc, and take the IP 169.254.60.179, and of course it can't see the router and the Internet.
I try to change the IP (Ipconfig /renew), but it does not work, i set the IP manually, and i can access the other PC and the router via PING, but the Internet Explorer does not work.
I have checked the Cables an all seems Ok.

Any Idea?

Thank You very Much.
 
1. Have you installed any new patches/updates? Any new programs?

2. Have you checked the cable, unplugged and replugged it?

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.
 
Thanks BCastner you're right, it was because a Malware.
The utility work wonderful and correct the problem.

Thanks again !!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top