Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can't find error code "0c45"
- Thread starter TSch
- Start date
MoshiachNow
IS-IT--Management
c45 Cannot configure the console. "Long live king Moshiach !"
I don't think there is such an error.
If you have tried to reboot and can't it could be:
c45 Cannot configure the console.
Alternatively, your system has crashed and tried to dump memory, however the dump space on your disk is not large enough to store the complete dump.
0c4 Partial dump, not enough space
0c5 Dump not started, unexpected error writing to dump device.
I would suggest rebooting and checking the aix error log.
This will probably indicate what caused the crash.
sysdumpdev -l will show details of your dump device.
If you have tried to reboot and can't it could be:
c45 Cannot configure the console.
Alternatively, your system has crashed and tried to dump memory, however the dump space on your disk is not large enough to store the complete dump.
0c4 Partial dump, not enough space
0c5 Dump not started, unexpected error writing to dump device.
I would suggest rebooting and checking the aix error log.
This will probably indicate what caused the crash.
sysdumpdev -l will show details of your dump device.
madmurdock
MIS
- Jan 13, 2003
- 105
On which OS did that appear?
This appears to be the cdrom microcode problem.
Do a 'lscfg -vl cd0'
ROS Level and ID line show 1_02. Since this is below 1_04 this is most likely the problem.
This appears to be the cdrom microcode problem.
Do a 'lscfg -vl cd0'
ROS Level and ID line show 1_02. Since this is below 1_04 this is most likely the problem.
- Status
Similar threads
- Locked
- Question
- Locked
- Question